Red Hat NETSCAPE MANAGEMENT SYSTEM 4.5 User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 286
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
Introduction and System Requirements
17
www.vmware.com
System Requirements
Server Hardware Requirements
Minimum
Processor: Intel® Pentium® II 500MHz and above
512MB RAM minimum
Two or more Ethernet adapters. Supported adapters include:
3Com® adapters
Alteon AceNIC-based adapters
Broadcom® BCM5700-based adapters
•Intel Pro/100 adapter
Intel PRO/1000 server adapters
Note: For best performance and security, separate Ethernet adapters should be
used for the console operating system and the virtual machines. It is also
possible to use just one Ethernet adapter, shared between the console operating
system and the virtual machines. For details, see Sharing Network Adapters and
Virtual Networks on page 224.
A SCSI adapter, Fibre Channel adapter or internal RAID controller.
The basic SCSI adapters supported are Adaptec®, BusLogic® and most NCR™/
Symbios™ SCSI adapters. The SCSI RAID adapters supported are Compaq® Smart
Array, Dell® PercRAID (Adaptec RAID and AMI MegaRAID), IBM® ServeRAID™ and
Mylex® SCSI RAID devices. The Fibre Channel adapters that are supported are
Emulex™ and QLogic™ adapters.
A SCSI disk or RAID LUN with unpartitioned space. In a minimum configuration,
this disk or RAID is shared between the console operating system and the virtual
machines.
Recommended for Enhanced Performance
A second disk controller with one or more drives.
The lists above outline a basic configuration. In practice, you may use multiple
physical disks, which may be SCSI disks, Fibre Channel disks or RAID LUNs. For best
performance, all of the data used by the virtual machines should be on the physical
disks allocated to virtual machines. Therefore, these physical disks should be large
enough to hold disk images that will be used by all the virtual machines.
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 285 286

Comments to this Manuals

No comments